2007 Chevrolet Cobalt

[kinell]

I have flashed my ADS-MSW online and cant seem to make it work with my Podofo (chinese Android radio). I have the PAC C2R-GM11 interface to retain my factory chimes. i am using the Blue/Yellow wire to the Key1 input on the Android. Pin A11 on my car is dark blue. Pin B14 to the white black wire. When hooked up my buttons on the radio were behaving strangely. Any ideas to make this work?

[billr]

Most of the android radios from overseas will have a steering wheel Key 1 Key 2 wire that you can connect directly to the vehicles resistive steering wheel control wires, so there is no need to have the Maestro SW involved. This will simplify the install for you and have a better chance of it it working properly since we don't normally support those type radios.

[kinell]

So the key1 wire ties into which wire on the car harness?

Thanks again

[billr]

whichever wire in the vehicle that the install guide for the Maestro SW calls out is the wire you connect the Key 1 to.