Maestro SW wiring to 2008 honda Civic for steering wheel controls

[avinashp]

Car Details:
2008 honda civic ex w/o navigation. steering wheel controls present.
I have a maestro sw and I am unsure which wires on the maestro need to be hooked up to the harness in the car. I have already updated the firmware for the unit as per the instructions in the weblink sw.
Here are the pins that i am guessing that will be used:
On the Maestro side:
01 PURPLE/RED - SWI CIRCUIT 1 INPUT
02 PURPLE/YELLOW - SWI CIRCUIT 1 OUTPUT/ANALOG 1 INPUT
03 PINK/RED - SWI CIRCUIT 2 INPUT
04 PINK/YELLOW - SWI CIRCUIT 2 OUTPUT/ANALOG 2 INPUT
05 BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
06 RED - ACCESSORY POWER +12V INPUT
07 BLACK - GROUND

Pin 06 and Pin 07 are pretty self explanatory. However for the other pins I am unsure.
here are the pins I think are going to be used based on the honda service manual:
A4 -> Multiplex integrated control unit(SCTY RADIO)
A6 -> Multiplex integrated control unit (K-Line)
A13 -> ECM/PCM (VSP)

All the other pins on the harness have a familiar assignment on the radio side.

please advice on what wires on the maestro side should be hooked up.
Thanks.

[Zack Flynn]

When the unit gets flashed online or with our desktop software a vehicle specific guide will be dynamically generated, showing you what wires from the SW harness get hooked to what colors on the factory wiring harness coming from the vehicle.

[JoeUrb]

I also have an 08 Civic and the printout is giving me wires that do not exist.
I have been looking at it for two days.

Specs
08 Civic EX
Satellite Rado
No Amplifier

Stereo has a 17 pin harness

[JustinFerroni]

Please send pictures of all connectors that plugged into the factory radio.
maestro.support@adsdata.ca

[JoeUrb]

So... I went back to Crutchfield and purchased the Maestro HO1 and Maestro RR

Everything is working EXCEPT the steering wheel controls.
When I push the steering wheel buttons there are no lights.

[JustinFerroni]

So... I went back to Crutchfield and purchased the Maestro HO1 and Maestro RR

Everything is working EXCEPT the steering wheel controls.
When I push the steering wheel buttons there are no lights.

Answered in your other post