2009 Honda Fit w/ AVH-4200NEX no Connection

Group using the HO1 and HO2 firmware * see specific firmware for full feature list.
crixxx23
New User
Posts: 4
Joined: Sat Mar 24, 2018 5:32 pm

Re: 2009 Honda Fit w/ AVH-4200NEX no Connection

Post by crixxx23 » Thu Mar 29, 2018 5:26 pm

Dara,

The unit wasn't getting enough constant power with a quick connect. Rewired with a solid connection and its good to go. Thank you for the help.

crixxx23
New User
Posts: 4
Joined: Sat Mar 24, 2018 5:32 pm

Re: 2009 Honda Fit w/ AVH-4200NEX no Connection

Post by crixxx23 » Sun Apr 22, 2018 4:11 pm

Support,

So my steering wheel control is running great, but I hooked up the 2 data wires to the OBD2 port and I am getting 2 errors that cycle between each other when I go to the gauges screen.. My radio reports OBD2 Error 1, OBD2 Not Responding Error.I have the unit connected per the vehicle specific instructions ,CAN H Brown/Red to White (Pin 6) ,CAN L Brown/Yellow to Red (pin 14) . I tried this with the 2 wires from the connector inline, as well as without the 2 wires from the connector spliced in. Both configurations result in the same errors. Any ideas? Thanks in advance.

Honda Ridgeline 2013
Pioneer AVH-4200NEX
iData Link Maestro

Post Reply

Return to “Honda”