2009 Venza backup camera issue

Group using the TO1 and TO2 firmware * see specific firmware for full feature list.
Post Reply
Kandrbru
New User
Posts: 2
Joined: Wed Feb 14, 2018 12:09 am

2009 Venza backup camera issue

Post by Kandrbru » Wed Feb 14, 2018 12:20 am

I installed a Kenwood DDX6903S using a T01 and MRR, prewired by Crutchfield. Everything works fine except when I put car in reverse, the camera does not come on. I can turn the camera on manually when in reverse. It is an aftermarket camera wired into my rear reverse light and the video wire is connected straight to the HU. Is something not hooked up right or do I need to splice between the purple/white and reverse wire?

User avatar
billr
ADS Team
Posts: 96
Joined: Mon Feb 05, 2018 9:18 am

Re: 2009 Venza backup camera issue

Post by billr » Wed Feb 14, 2018 8:44 am

Hello, is the Purple/White wire of the MRR connected to the Reverse wire of the Kenwood?
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

Kandrbru
New User
Posts: 2
Joined: Wed Feb 14, 2018 12:09 am

Re: 2009 Venza backup camera issue

Post by Kandrbru » Wed Feb 14, 2018 11:58 am

I got it working now, thanks. Issue was I did not have the OBDII connected. Once I connected it, everything worked. I didn’t think it would have anything to do with backup camera so didn’t connect while testing it.

Post Reply

Return to “Toyota”