2016 Jeep Wrangler unlimited

Post Reply
aldo6
New User
Posts: 1
Joined: Sun Jun 16, 2019 6:53 pm

2016 Jeep Wrangler unlimited

Post by aldo6 » Sun Jun 16, 2019 7:00 pm

I have connected my aftermarket stereo using maestro rr and ch1 harness. All connections have been made with after market harness and ch1. the screen turns on and all features work including SWC, but am getting no sound to any of my speakers. The jeep has no factory amp. Have been at this problem for 2 days now. I thought the maestro was as simple as plug and play.

User avatar
billr
ADS Team
Posts: 404
Joined: Mon Feb 05, 2018 9:18 am

Re: 2016 Jeep Wrangler unlimited

Post by billr » Mon Jun 17, 2019 8:21 am

Check the big gray connector on our CH1 harness, look at the 4 sets of speaker wires then look on the factory harness side and see of there are the same amount of wires on that side. If you see only half the wires you have an amp. Make sure the Blue/White amp turn on wire is connected.

If you see all 4 sets of wires then you don't have an amp. if that is the case you might have a bad speaker, a wire pinched, or the radios speaker outputs are bad. Some troubleshooting will have to be done to see if it's the radio, a pinched wire, or the speaker(s) but that rules out the Maestro since we do nothing with the speaker outputs in a non-amplified vehicle.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

cduffy3100
New User
Posts: 2
Joined: Tue Jun 18, 2019 7:11 pm

Re: 2016 Jeep Wrangler unlimited

Post by cduffy3100 » Tue Jun 18, 2019 7:24 pm

@aido6. I'm having same problem with no sound from speakers. I have no factory amp and do not have the blue/white wire connected. Any recommendations? Thanks

User avatar
billr
ADS Team
Posts: 404
Joined: Mon Feb 05, 2018 9:18 am

Re: 2016 Jeep Wrangler unlimited

Post by billr » Tue Jun 18, 2019 7:46 pm

follow the same recommendations I suggested, they would apply to you too.
William (Bill) Repicky
Automotive Data Solutions Technical Support
MECP Master Certified
ASE A6 Certified
866-427-2999

Post Reply

Return to “CH1 radio replacement solution”