2012 Jeep Wrangler with Kenwood DDX9903S and Maestro RR

Post Reply
jo11ymon
New User
Posts: 3
Joined: Mon Dec 11, 2017 3:07 pm

2012 Jeep Wrangler with Kenwood DDX9903S and Maestro RR

Post by jo11ymon » Mon Dec 11, 2017 5:32 pm

This weekend I installed the Kenwood DDX9903S in my Jeep with the Maestro RR. My Jeep is a 2012 with the Infinity system and Uconnect

I selected to keep OEM system and set up both the Maestro RR and radio as such. The Uconnect phone controls and text capabilities still seem to work, but I do not have access to the Uconnect USB in my center console. This is used to run my IPod. This was one of the main reasons I kept the Uconnect system.

I used the RR and The CH1 harness. I also added a SiriusXM receiver and used the antenna adapter to connect to factory satellite antennae.

Is there a connection that I am missing to control the center console USB?

User avatar
Zack Flynn
ADS Team
Posts: 350
Joined: Mon Dec 12, 2011 9:46 am

Re: 2012 Jeep Wrangler with Kenwood DDX9903S and Maestro RR

Post by Zack Flynn » Mon Dec 11, 2017 7:39 pm

As long as the original radio was one we support retaining Uconnect on, the USB should still work. if you have a USB stick plugged in, can you access any media on it? Does the system attempt to switch to USB when you give it the voice command?
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

Post Reply

Return to “CH1 radio replacement solution”