2016 Jeep JKU - Pioneer 4200NEX

Post Reply
New User
Posts: 1
Joined: Sun May 14, 2017 8:05 am

2016 Jeep JKU - Pioneer 4200NEX

Post by HNIC » Sun May 14, 2017 8:14 am

1. Audio cable from Maestro does not seem to plug into back of my Pioneer AVIC-4200NEX. I'm guessing this was for UConnect on factory radio? Don't plan on using UConnect but Bluetooth of Pioneer. Am I correct? If so can this input be used for anything else?
2. There is a Red 2 pin connector on the CH1 Harness. On the install diagram it is not connected and there is a note that says "RED (NC). Am I correct this means don't connect it?
3. I have my purple/white wires connected but backup camera does not come on when I put in reverse. I will troubleshoot settings in the Head Unit. Am I missing anything else obvious?

Peace & Hairgrease

User avatar
Dara DeGrand
ADS Team
Posts: 4949
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2016 Jeep JKU - Pioneer 4200NEX

Post by Dara DeGrand » Mon May 15, 2017 9:11 am

1. It should plug into Aux. It's for your uConnect audio.
2. NC = Not Connected
3. Make sure your reverse interrupt is set to ON and the polarity is Battery (+). Is this vehicle automatic or manual transmission?
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “CH1 radio replacement solution”