2010 Honda Accord Crosstour

Section reserved for Firmwares under development
Post Reply
JShoe
New User
Posts: 2
Joined: Thu Jan 19, 2017 8:57 pm

2010 Honda Accord Crosstour

Post by JShoe » Thu Jan 19, 2017 9:03 pm

I am about to install a Kenwood DDX9703 in my Crosstour. I see that Maestro RR firmware is available for my car and that there is a wiring diagram. So 2 questions:

1. Any idea when a harness for my car is going to be ready? (I saw a Civic was shipping in early Feb).
2. Since I was planning on installing in early Feb (presumably before I could get the harness, does the diagram allow for direct wiring?

Thanks.

User avatar
Dara DeGrand
ADS Team
Posts: 5215
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2010 Honda Accord Crosstour

Post by Dara DeGrand » Mon Jan 30, 2017 9:06 am

1. The accord crosstour is not covered by this firmware, BUT it is already covered by our steering wheel control and gauges firmware.
2. The hardwire information for the already live firmware can be found here: http://cdncontent2.idatalink.com/corpor ... 160816.pdf

As of now, we don't have an ETA on a harness/more advanced coverage of this vehicle.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

JShoe
New User
Posts: 2
Joined: Thu Jan 19, 2017 8:57 pm

Re: 2010 Honda Accord Crosstour

Post by JShoe » Mon Jan 30, 2017 12:47 pm

Thanks. I thought this was the case, so I ordered the RR and will be installing it this weekend.

Post Reply

Return to “Beta test section”