Help - 2013 F150 Kenwood DDX9904S Install, ADS-MRR Module flashing red

Group using the FO1 and FO2 firmware for Ford SYNC retention * see specific firmware for full feature list.
Post Reply
queterco
New User
Posts: 1
Joined: Wed May 09, 2018 12:42 am

Help - 2013 F150 Kenwood DDX9904S Install, ADS-MRR Module flashing red

Post by queterco » Wed May 09, 2018 12:46 am

We flashed by firmware via the idatalink site for the module twice and have the black 4 pin connector by the USB on the ADS-MRR connected to the back of the idatalink port on the Kenwood unit. We get the dual flashing red LED and have even tried the red 4 pin connectors. We tried with all the other cables connected to the module at the same time and no luck.

Any other thoughts or miswiring?

User avatar
Dara DeGrand
ADS Team
Posts: 4791
Joined: Mon Dec 02, 2013 1:34 pm

Re: Help - 2013 F150 Kenwood DDX9904S Install, ADS-MRR Module flashing red

Post by Dara DeGrand » Wed May 09, 2018 2:44 pm

Check the radio serial number menu in the radio and see if it matches the label on the outside of the radio. If it doesn't match, or if you entered the wrong model or serial number during the RR flashing process, that would cause this problem too.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Post Reply

Return to “Ford, Lincoln, Mercury, Mazda”