Page 1 of 1

Clarification please....2006 Honda Civic

Posted: Thu Sep 13, 2018 2:23 pm
by wedmservices
The install guide mentions a 22 pin connector "A" and a 12 pin connector "B". I haven't removed my factory Nav yet, but I have my Honda aftermarket 12 pin harness soldered to my Pioneer harness, and I'm not sure where the 22 pin connector is? Any help greatly appreciated.

Re: Clarification please....2006 Honda Civic

Posted: Thu Sep 13, 2018 3:50 pm
by Dara DeGrand
The 22 pin is your main radio plug.

Re: Clarification please....2006 Honda Civic

Posted: Thu Sep 13, 2018 4:29 pm
by wedmservices
Ok thanks, Is that the plug going into my new Pioneer unit?

Re: Clarification please....2006 Honda Civic

Posted: Thu Sep 13, 2018 5:22 pm
by Dara DeGrand
No, the factory radio's main plug.

Re: Clarification please....2006 Honda Civic

Posted: Thu Sep 13, 2018 10:21 pm
by wedmservices
So the 12 pin harness I'm using for the speaker harness is not used? The Maestro will tie in to a few wires on a separate interface plug that I will otherwise not be using? Can you suggest a way to tie in without cannibalizing that plug? Also, is there a pin out diagram that might show the locations? Thanks again.

Re: Clarification please....2006 Honda Civic

Posted: Fri Sep 14, 2018 9:05 am
by Dara DeGrand
The wiring diagram you get when you flash the maestro should give you all the info you need to do the install. It tells you where the plug is found, what pin you're connecting to, and what color that wire should be. If you have any further questions, I recommend calling our tech support line and we can talk you through the information shown in the guide to clarify it.