Installation guide says Black/White wire to radio harness A13?

Analog Steering Wheel Interface
Post Reply
shibumi
New User
Posts: 2
Joined: Sat Apr 22, 2017 10:23 am

Installation guide says Black/White wire to radio harness A13?

Post by shibumi » Sat Apr 22, 2017 2:11 pm

So, my installation guide says that the Black/White wire coming out of the module harness is supposed to connect to my radio (Connector A - 20 pin) at pin location 13 - well, pin location 13 on my radio harness is my Left Front negative speaker wire - is that where it's actually supposed to go?

The Purple/Red (Violet) Wire coming out of the module harness going to my Pin 19 is my radio harness's Steering Wheel Remote (+) positive signal (wire colour is purple) - Pin 20 says it's my Steering Wheel Remote (-) negative signal (colour is pink/black)

Code: Select all

VEHICLE WIRES
WIRE COLOR				CON.	PIN
Purple/Red (Violet)	A		19
Purple/Yellow			Not Connected
Pink/Red					Not Connected
Pink/Yellow				Not Connected
Black/White				A		13
Black/White				Not Connected
Red							Accessory
Black						Ground
Vehicle is a 2013 Suzuki Grand Vitara Urban

User avatar
Zack Flynn
ADS Team
Posts: 250
Joined: Mon Dec 12, 2011 9:46 am

Re: Installation guide says Black/White wire to radio harness A13?

Post by Zack Flynn » Mon Apr 24, 2017 12:42 pm

Our Black/white wire goes to pin 20, which is pink/black, and our violet/red wire goes to pin 19, which is violet
Zack Flynn
Automotive Data Solutions
Technical Support & MECP Master Installation Technician
Zachary.flynn@adsdata.ca

shibumi
New User
Posts: 2
Joined: Sat Apr 22, 2017 10:23 am

Re: Installation guide says Black/White wire to radio harness A13?

Post by shibumi » Mon Apr 24, 2017 1:33 pm

Okay, good to know... You might want to update the installation instructions as it says pin A13 on the radio harness for 2013 Suzuki Grand Vitara

Post Reply

Return to “Maestro SW”