2012 nissan titan wiring

Steering Wheel & Radio Replacement Combo
Post Reply
webracin
New User
Posts: 3
Joined: Sat Mar 19, 2016 8:43 pm

2012 nissan titan wiring

Post by webracin » Sat Mar 19, 2016 10:08 pm

I am trying to connect my Maestro RR to my Kenwood DDX9702. I have a 2012 Nissan Titan with the Rockford Fosgate system.

Everything was going great until I tried to connect the Maestro to my factory harness. The instructions say to splice into a 16 pin connector (swi data 1, swi data 2 and swi ground). I only have a 24 pin connector and a 16 pin (however there are no wires in the specified location).

I have read on forums that Nissan changed from the 16 pin to a 24 pin in 2012, but can't find any information about the correct wires to splice.

Please help!

User avatar
Dara DeGrand
ADS Team
Posts: 4551
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2012 nissan titan wiring

Post by Dara DeGrand » Mon Mar 21, 2016 10:28 am

In that year, there were 3 trims of Titan radios... The plug style and wire colors differ quite a bit. In the "Mid-line radio circuit" (their name for Rockford), there are quite a few variations.

See attached.
The red wire may also be red/green or purple.
The green wire may also be green/white or green/orange
The blue wire may also be yellow/red or red/black
titan.png
You do not have the required permissions to view the files attached to this post.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

webracin
New User
Posts: 3
Joined: Sat Mar 19, 2016 8:43 pm

Re: 2012 nissan titan wiring

Post by webracin » Thu Mar 24, 2016 5:56 pm

Thanks Dara!

I resolved my issue by running a set of wires to under the passengers seat and taping into the Bluetooth wires. All is working.

Would you know if there are any plans to add more functionality down the road. Kind of stinks that all the Maestro will give you on the Titan is some gauges and steering wheel control. Would like to see tire pressure and doors open/closed would be a good start.

User avatar
Dara DeGrand
ADS Team
Posts: 4551
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2012 nissan titan wiring

Post by Dara DeGrand » Fri Mar 25, 2016 8:35 am

We're looking into doing a full t-harness solution for Nissan, but it won't be in the immediate future (likely several months to a year).
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

webracin
New User
Posts: 3
Joined: Sat Mar 19, 2016 8:43 pm

Re: 2012 nissan titan wiring

Post by webracin » Fri Mar 25, 2016 1:17 pm

Count me in for a beta tester when start. I have 20÷ years of electronics experience with the US Navy, and 3 years running a major retailers test lab.

Red0ak
New User
Posts: 2
Joined: Thu Nov 02, 2017 9:45 pm
Location: Nashville TN

Re: 2012 nissan titan wiring

Post by Red0ak » Mon Mar 19, 2018 6:43 pm

If I do this the way webracin did it by running the wires to under the passenger seat, will I still need to use jumpers?

User avatar
Dara DeGrand
ADS Team
Posts: 4551
Joined: Mon Dec 02, 2013 1:34 pm

Re: 2012 nissan titan wiring

Post by Dara DeGrand » Tue Mar 20, 2018 8:17 am

No.
Dara DeGrand
Maestro Technical Support Manager
Automotive Data Solutions Inc.
8400 Bougainville, QC
T 514.807.2888
TF 866.427.2999

Red0ak
New User
Posts: 2
Joined: Thu Nov 02, 2017 9:45 pm
Location: Nashville TN

Re: 2012 nissan titan wiring

Post by Red0ak » Thu Apr 12, 2018 6:59 pm

I finally finished mine. The way webracin did it and Dara confirmed works well. If you have different plugs than instructed just run the wires to the BT module under the seat. No jumpers. Thank you Dara for the help.

Post Reply

Return to “Maestro RR”